Plain and Polished 316L Stainless Steel Sheet

As a lead manufacturer and supplier of steel sheet stainless steel sheet, steel plate stainless steel plate etc, our products such as stainless steel 201, 202 , 301 , 303 , 304 , 304L , 304H , 309, 309S , 309Nb ,310 , 310S , 310L , 310H ,  310H , 314, 316, 316L, 316Ti, 317, 317L, 321, 347, 347H , 40

Featured Products


As a lead manufacturer and supplier of steel sheet stainless steel sheet, steel plate stainless steel plate etc, our products such as stainless steel 201, 202 , 301 , 303 , 304 , 304L , 304H , 309, 309S , 309Nb ,310 , 310S , 310L , 310H ,  310H , 314, 316, 316L, 316Ti, 317, 317L, 321, 347, 347H , 409L , 420 , 420J1 , 420J2 , 430 , 431,434 , 436L , 439 , 441, 443 , 444 , 904L , 2205 , 2304 , 2507 , 253MA , 254Mo , 631 , 654MO ,17-7pH ,N08367 (AL 6XN )  sheet plate are always available on stock. For cold rolled stainless steel sheet, thickness range from 0.3mm - 8.0mm, for hot rolled stainless steel plates, thickness range from 3.0-100mm.



Quick Details
 
StandardASTM  GB/T  JIS4  ASME BS  DIN  EN.
Material310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L,
 302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc
Brand  nameTISCO, BAO STEEL, ZPSS, LISCO, POSCO, NAS.
TechniqueHot  Rolled  And  Cold  Rolled.
Surface2B, 2D, BA, NO. 1, NO. 4, NO. 8, 8K, mirror  , checkered  , embossed  , hair  line, sand  blast,Brush, etching, etc
Thickness0.25~150mm
Width600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Price  termEx-Work, FOB, CNF, CFR, CIF, etc

Finish Characteristics
Surface FinishDefinition and Application
No.1The surface is finished by heat treatment and pickling or processes corresponding there to after hot rolling
2DThe finishes after cold rolling, by heat treatment,  pickling or other equivalent treatment
2BThe finish after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to give an appropriate luster
BACold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror
NO.3Polished with abrasive belt of grit#100~#200,have better brightness with discontinuous coarse stria
NO.4Polished with abrasive belt of grit#150~#180,have better brightness with discontinuous coarse stria
HairlinePolished with abrasive belt of grit#150~#320 on the NO.4 finish and has continuous streaks
8KThe product have excellent brightness and prefect reflexivity can be the mirror

Plain & Polished 316L Stainless Steel Sheet
 PRODUCT DISPLAY 

We have a very rich inventory, 200 300 Series Stainless Steel Sheet Stock with plate 310S, 310, 309, 309S, 316, 316L, 316Ti, 317, 317L, 321, 321H, 347, 347H, 304, 304L,302, 301, 201, 202, 403, 405, 409, 409L, 410, 410S, 420, 430, 631, 904L, Duplex, etc
Our main products are stainless steel plate and stainless steel coil, We will provide the best quality, the most favorable price.

Plain & Polished 316L Stainless Steel Sheet
Plain & Polished 316L Stainless Steel Sheet
Plain & Polished 316L Stainless Steel Sheet
Plain & Polished 316L Stainless Steel Sheet
Plain & Polished 316L Stainless Steel Sheet
Stainless Steel Grades and Mechanical Properties
        
CommonCondition0.2‰ ProofTensileTensileHardessRockewellVickers
Name StrengthStrengthElongationBrinellHardnessHardness
  MPa MinMPa Min(%min)HB(max)HRB(max)HV(max)
S 201-2Annealed3106604040-100240
S 30100Annealed205520404021995210
S 301001/4 hard5208602525---
S 301001/2 hard76010301518---
S 301003/4 hard93012101012---
S 30100Full hard965128089---
S 30200Annealed205520404020292210
S 30300Annealed2405855050---
S 30400Annealed205520404020292210
S 304LAnnealed170485404018388210
+Annealed3106004040---
S 31000Annealed205520404021795225
S 31600Annealed205520404021995225
S 316LAnnealed170485404021795225
S 316TiAnnealed205520404021795225
S 31700Annealed205515353521795-
S 317LAnnealed205515404021795-
+Annealed450620252529032RC-
S 32100Annealed205520404021795210
S 34700Annealed205515404020192-
+Annealed400600252529031RB-
+Annealed550800252531032RB-
S 40900Annealed2053802022-80-
S 41000Annealed205450202221795210
S 42600Annealed2765173030---
S 42000Annealed-520-12---
S 43000Annealed205450202218388210
S 43100Cold Finished-965 Max-----
S 440ACold Finished-------
S 440CCold Finished-------
S 444Annealed310415202021795200
S 446Annealed28048020----
17 -4PHH1025100010701212331--
+Annealed550750252527028HRC-
3CR12Annealed2804601818220--
+Annealed2204903535-90-
CromaniteAnnealed4508004040250--


Parameter table of stainless steel 
 
 
Grade and Main chemical composition%
 
chemical composition% CSiMnP≤S≤CrMoNiOther
201≤0.15≤1.005.5-7.50.060.0316-18-3.5-5.5N≤0.25
202≤0.15≤1.007.5-10.00.060.0317-19-4.0-6.0N≤0.25
301≤0.15≤1.00≤2.000.0450.0316-18-6.0-8.0-
303≤0.15≤1.00≤2.000.2≥0.01517-19≤0.68.0-10.0-
304≤0.08≤1.00≤2.000.0450.0318-20-8-10.5-
316≤0.08≤1.00≤2.000.0450.0316-182-310-14-
430≤0.12≤0.75≤1.000.040.0316-18-≤0.6 

Corrosion Resistance: resists most oxidizing acids and salt spray.
 
Physical PropertiesMetricEnglishComments
 
Density8g/cc0.289 lb/in³ 

Mechanical Properties
 
Hardness, Brinell123123 Converted from Rockwell B hardness.
Hardness, Knoop138138 Converted from Rockwell B hardness.
Hardness, Rockwell B7070 
Hardness, Vickers129129 Converted from Rockwell B hardness.
Tensile Strength, Ultimate505MPa73200 psi 
Tensile Strength, Yield215MPa31200 psi at 0.2% offset
Elongation at Break70%70 % in 50 mm
Modulus of Elasticity193 - 200 GPa28000 - 29000 ksi 
Poisson's Ratio0.290.29 
Charpy Impact325J240 ft-lb 
Shear Modulus86GPa12500 ksi 

Electrical Properties
 
Electrical Resistivity7.2e-005ohm-cm7.2e-005 ohm-cm at 20°C (68°F); 1.16E-04 at 650°C (1200°F)
Magnetic Permeability1.0081.008 at RT

Thermal Properties
 
CTE, linear 20°C17.3µm/m-°C9.61 µin/in-°F from from 0-100°C
CTE, linear 250°C17.8µm/m-°C9.89 µin/in-°F at 0-315°C (32-600°F)
CTE, linear 500°C18.7µm/m-°C10.4 µin/in-°F at 0-650°C
Specific Heat Capacity0.5J/g-°C0.12 BTU/lb-°F from 0-100°C (32-212°F)
Thermal Conductivity16.2W/m-K112 BTU-in/hr-ft²-°F at 0-100°C, 21.5 W/m°C at 500°C
Melting Point1400 - 1455 °C2550 - 2650 °F 
Solidus1400°C2550 °F 
Liquidus1455°C2650 °F 


The stainless steel plate packing

Plain & Polished 316L Stainless Steel Sheet

Company Information

S.H.C Stainless Steel Group. was founded in 2005, is a professional engaged
in the production and operation of stainless steel products enterprises, has many years
of experience in the stainless steel industry, the main customer market in Europe, the Middle East,
Southeast Asia and South America and other regions. Our products include stainless steel plates,
rolls, tubes, rods, angles, fittings and flanges.

Our Office And Team

 
Plain & Polished 316L Stainless Steel SheetPlain & Polished 316L Stainless Steel Sheet




Our Factory Work Shop

Plain & Polished 316L Stainless Steel Sheet
Plain & Polished 316L Stainless Steel Sheet

Our Service

We also supply OEM, customized sizes,cutting service,customized fabrication .We can cut specific sizes according to your
requirements,or you can customize different shapes according to your drawings.
    Cutting type:laser cutting,water-jet cutting,laser cutting etc
    Cutting tolerance:+/-0.3mm
    Processing method:cutting,bending,punching,stamping,machining etc


Plain & Polished 316L Stainless Steel Sheet

FAQ

Q1: What products can you offer?
A: We can offer you general steel types like 310S, 316L,304.304L.201,904L, 316H, 316,316L 300
and 400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.

Q2. Can you produce the products according to my own drawings?
Yes,we can produce the products according to your drawings that will be most satisfy you.

Q3. How does your factory do regarding quality control?
Quality is priority. We always attach great importance to quality controlling from beginning to end.

Q4. Can I request to change the form of packaging and transportation?
Yes,We can change the form of the packaging and transportation according to your request, 
but you have to bear their own costs incurred during this period and the spreads.


Q5: How long is the Delivery time?
A: 3~30working days after confirming the payment.
If the order is urgently, we will push our workshop finish in advance.

Q6: What is your Payment?
A: T/T, L/C, etc.


why choose us ?

1. More than 10 years experience in dealing stainless steel business

2. Professional business sales

3. Competitive price with good quality material

4. Own reputation from customer

5. Full positive attitude  and responsibility to fulfill clients

6.Reply email within eight hours

7. 24--hours Online Service

Looking forward to working with you 
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours