1: Brief Introduction Of 5005 aluminum
5005 aluminum is a 5000-series aluminum alloy: the main alloying addition is magnesium, and it is formulated for primary forming into wrought products. 5005 is the Aluminum Association (AA) designation for this material. In European standards, it will be given as EN AW-5005. AlMg1(B) is the EN chemical designation. N41 is the British Standard (BS) designation. And A95005 is the UNS number.
It has been in use since 1935, but has only received its standard designation in 1954. This material is well established: the Further Reading section below cites a number of published standards, and that list is not necessarily exhaustive.
Aluminium / Aluminum 5005 alloy has poor machinability in the soft temper conditions. However, the alloy can be machined, but is a lot tougher than many of the other aluminum alloys. The alloy in the harder tempers such as H34 and H38 can be machined better than the alloy in the soft temper condition.
Formability of Aluminium / Aluminum 5005 alloy, especially in the softer tempers, can be easily achieved using conventional methods.
Aluminium / Aluminum 5005 alloy has excellent welding capacity. Welding is possible using all the commercial methods. Filler metal of the same alloy has to be used. Welding using resistance method of the O or annealed temper material requires some trial and error determination.
Aluminium / Aluminum 5005 alloy cannot be heat treated, except when annealed to minimize cold working strain.
Aluminium / Aluminum 5005 alloy is forgeable.
Aluminium / Aluminum 5005 alloy does not require hot working in most cases. But if it is required the preferable temperature range is 371 to 204°C (700 to 400°F).
Aluminium / Aluminum 5005 alloy has excellent cold working capacity including the harder tempers.
Annealing can be performed at 343°C (650°F) if required. This should be followed by air cooling.
Aluminium / Aluminum 5005 alloy can be hardened only by cold working.
Aluminium / Aluminum 5005 alloy is widely used in the manufacture of the following products:
- Small boats
- Gas lines
- Refrigerator panels
The 5005 alloy can also used in architectural parts and as an electrical conductor. It is very useful to avoid excessive finishing costs when using the 3003 alloys due to surface roughness while drawing.2: Chemical Composition Of Our Main Grades And Designations
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
6000 series: 6101,6201,6003,6103,6105,6205,6006,6106,6110,6061,6060,6063,6863,6081,6082,6162,6863
7000 series: 7001,7003,7005,7108,7129,7146,7050,7472,7075,7076,7277,7178,7278,7091,7277
8000 series: 8001,8004,8006,8011,8111,8014,8030,8130,8177,8079,8081,8280,8091
3: Aluminum Plate/Coil/Flat Sheet Process
4: Aluminum Alloy Plate/Flat Sheet Package
5: About us
Tianjin Zhongyantiancheng Steel Co.,Ltd(short for ZYTC ) is a professional manufacturer and exporter of steel products in China, located in Tianjin Beichen District, having the biggest port in North China.
With 20 years of development, the group has become the leader in steel, product variety, complete specifications and so on in North China market, large inventories more than 100,000 tons are maintained all the time.
ZYTC is specialized in steel products, especially Stainless steel pipe,Stainless steel bar,Stainless steel plate (TG,KSK,BG,Krupp), Round bar(SHOUGANG,DAYE), Spiral pipe(LIDA), Aluminum steel plate,Aluminum pipe ,Copper and so on .
ZYTC has cooperated with Tianjin Seamless Steel Tube Plant(TPCO), Baotou Steel Pipe Plant, Chengdu Steel Pipe Plant, Anshan Steel Pipe Plant,Baoshan Steel Pipe Plant and other steel pipe plants.Round bar cooperated with Beijing shougang goup,Tonggang steel group, Daye steel bar group ,Benxi bengang group an so on , Baotai titanium group,Baoji Lixing group,Stainless steel plate cooperated with Shanxi TAIGANG Steel Plate grouop,Baogang group,Shanghai Kelubo group ,and Puxiang steel group. all these corporations mentioned above are our shareholder partners.
ZYTC principle is: supplying the best products and service,being the best supplier.
The company can make steel product according to particular specifications and materials. ZYTC will perfect our quality management system and supply products of high quality to our customers.
We are all looking forward to establishing business relationships with customers all over the world!
6: Why choose us
* More than 20 years experience in stainless and aluminum steel fields.
* Samples available.
* Specialist metallurgic advice and flexible service.
* High level of expertise, in-depth product knowledge.
* Competitive price, high quality,rich experiences and high reputation
* Delivered on time.
* Good after-sale service.
* Well recognized and trusted by customers.