Optional controller E21, E210, DA41, DA52S, DA56S, DA66T, DA69T ect
(1),Introduction of the hydraulic press brake and bending machine:
Totally EU streamlined design,Mono block by welding robots & aparatus and stress relief process by Annealing treatment.
2.Hydraulic synchronised positive stop design,and by Etsun NC programmable controller assuring accurate repeatability &ease of use.
3.Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.
4.Inverter with E21 NC System operated back gauge with quality support fingers also with vertical adjustment
5.Inch, single mode being designed for the machine and reversing and maintain time can be controlled by the time relays.
6.Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety.
(2), hydraulic bending brake Standard Equipment:
1,Estun E21 NC control System
2,Powered Back gaugeX-axis
3,DELTA Inverter controlled back gauge
4,HIWIN Ball screws & Polished rod with 0,05mm accuracy.
5,Squaring Arm and Front Support Arms
6,Germany Bosch-Rexroth Hydraulic
7,Germany EMB Tubing connector
8,Germany Siemens Main Motor
9,Tele mecanique/Schneider Electrics
10,Hydraulic &Electrical overload protection
Q1: If some problem happend to this machine during warranty period,what should i do?
----------The max thickness ,length and material of the plate that you need to bend.
|